Techical discuss

5083-H112 Aluminium Alloy For Tanker Applications

  • Monday, 16 December 2024
  • 0
  • 44
  • 0

5083-H112 Aluminium Alloy For Tanker Applications

Aluminum alloy 5083 is a medium strength alloy that has good corrosion resistance, excellent weldability and can be cold formed.5083-h112 aluminium plate It is frequently used in automotive, marine and ship building applications. The main alloying element in the 5083-h112 aluminium plate is magnesium with slight contents of manganese and chromium.

The 5083-h112 aluminum plate has better corrosion resistance compared to other aluminium alloys due to its low density, good weldability and strong thermal conductivity.5083-h112 aluminium plate It can also be used in the fabrication of pressure vessels and car wheels. This is because it has lower weight than steel, reducing fuel consumption and tire wear during transportation.

This type of aluminum alloy is very well suited for LNG tank, semi-trailers and fuel tankers, as it is resistant to general corrosion.5083-h112 aluminium plate Its light weight greatly reduces the loading and unloading times for LNG, fuel and other liquids. It also helps to improve the safety of the transport and extends the service life of the tanker.

In addition, the 5083-h112 aluminium plates can be easily welded and machined. The weldability of this alloy is comparable to that of mild steel. It can be welded by the TIG and MIG welding techniques. After welding, the tensile and yield strengths are similar to those of the annealed condition. It is important that the aluminium be dry and clean before welding to avoid contamination & porosity in the weld.

5083-h112 aluminium plate for tanker has excellent forming ability, and its strength is not reduced during bending or stretching. It can be welded by the TIG, MIG and SAW welding techniques. The forming strength of this material is higher than that of mild steel, so it is an ideal choice for automotive and aircraft industry. The forming process of this aluminium alloy is quite simple, but the finishing process must be done properly to ensure its high quality.

The 5083-h112 aluminium plate can be cold formed and rolled, but it is important that the thickness of the product is carefully controlled. The forming load must be evenly distributed over the area to obtain the best results. The tool and press load must also be balanced to avoid damage to the material. For cold forming, the tool and die clearance should be about 7.5% of the thickness for temper O, or about 11% for the other tempers.

When a large plate is delivered to the customer, it should be stored in a closed carriage or warehouse during transit and transshipment. If it needs to be stored in the open air, it must be tightly covered and tied with rainproof cloth. This will ensure that water, rain and snow cannot enter the packaging box. It is also necessary to tamp down the edges to prevent the plate from rolling up and becoming damaged. The tamping can be carried out using hand or electric hammers. The tamping force should be between 225-250 kg per square centimeter. For larger sizes, hydraulic tampers can be used.

Tags:6061 aluminum plate

0users like this.

Leave a Reply