stainless steel aluminum alloy copper bar products LuoyueMetal
11SMn30 (1.0715) Cold Drawn Steel Hexagon Bar - Free-Cutting, D2.5-50 mm, H9
This 11SMn30 (1.0715) cold drawn steel hexagon bar is a free-cutting, low-carbon manganese steel supplied in bright drawn condition for high-speed machining of nuts, bolts, fittings and precision turned parts. The hexagonal profile is produced by cold drawing rather than hot rolling, which gives tight dimensional control and a scale-free surface.
Bars are supplied from D2.5 mm to D50 mm to an H9 tolerance, in 2-4 m lengths and packed at 500-1000 kg per bundle. Optional requirements such as magnetism, hardness, straightness, roundness, coercive strength and yield resistance can be specified, and material is drawn from a documented mill list covering China, Taiwan, Japan and Europe.
Product Overview
The 11SMn30 grade - also designated 1.0715 - is a sulfur-bearing free-cutting steel formulated for high-speed machining. It forms short, well-broken chips, which improves surface finish and extends tool life on automatic and CNC lathes compared with a plain carbon grade.
Cold drawing holds the bar within an H9 tolerance and leaves a clean, bright surface that can go straight to machining without pickling or descaling. Straightness, roundness and coercive strength can be specified and verified where the part demands them, which is why the grade is used for high-straightness precision components such as printer parts.
Key Product Features
- Free-cutting 11SMn30 chemistry: The sulfur-bearing 11SMn30 grade is designed for high-speed machining. It forms short, well-broken chips, which improves surface finish and extends tool life on automatic and CNC lathes.
- Cold drawn to H9 tolerance: Bars are drawn rather than hot rolled, so D2.5-50 mm hexagon bar is delivered within an H9 tolerance with the dimensional consistency that bar-fed machining centres require.
- Bright, scale-free surface: The drawn surface arrives clean and smooth, so components can move directly to machining without pickling or descaling.
- Straightness and roundness control: Straightness, roundness, coercive strength and yield resistance can be specified and verified as optional requirements - a combination used for high-straightness precision parts.
- Documented mill sourcing: Bars come from a defined mill list covering China, Taiwan, Japan and Europe, including Baosteel, Hangzhou Iron & Steel, Nanjing Iron & Steel, Dongbei Special Steel, Tsingshan, JFE, Sumitomo, Saarstahl, British Steel and Global Steel Wire.
- Plate cutting and secondary processing: Steel plate can be cut to the required width and length: laser cutting for thicknesses under 30 mm and OXY / flame cutting above 30 mm, with milling, grinding, drilling and angle preparation available. Welding to drawing is also supported.
Product Images
Technical Specifications
| Grade | 11SMn30 / 1.0715 free-cutting steel |
|---|---|
| Form | Cold drawn steel hexagon bar |
| Size range | D2.5 mm - D50 mm (tolerance H9) |
| Length | 2 m - 4 m |
| Packing | 500-1000 kg per bundle |
| Optional requirements | Magnetism, hardness, straightness, roundness, coercive strength, yield resistance |
| Plate cutting capability | Laser cutting under 30 mm; OXY / flame cutting over 30 mm |
| Secondary operations | Milling and grinding to bright surface, drilling, angle preparation, welding to drawing |
| Sourcing mills | Baosteel, Hangzhou Iron & Steel, Nanjing Iron & Steel, Dongbei Special Steel, Tsingshan, China Steel (Taiwan), JFE, Sumitomo Metals (Japan), Saarstahl (Germany), British Steel (UK), Global Steel Wire (Spain) |
| Main uses | Printers and office equipment, high-straightness precision machined parts |
Typical Applications
- Nuts, bolts and fasteners machined from bar
- Precision turned parts for printers and office equipment
- General free-cutting parts produced on automatic lathes
- Shafts and components requiring high straightness and roundness
- Industrial parts cut from steel plate (laser under 30 mm, flame above 30 mm)
- Fabricated assemblies welded to drawing
Project note: the optional requirements listed above are agreed per order - hardness, straightness, roundness, coercive strength and yield resistance are not default inspections. Plate cutting follows a defined route, and on 200 mm plate the high flame-cutting temperature can affect the angle edges, so corners are reworked to specification before dispatch.
Understanding the Specification Terms
Enquiries for this product often combine terms that describe different things. Clarifying them early avoids the most common sourcing errors:
- Free-cutting (free-machining) steel describes a grade formulated with sulfur so that chips break cleanly during machining - it is a machinability property, not a strength grade.
- Cold drawn or hot rolled describes how the bar was formed. Cold drawing gives the tighter tolerance and bright surface; hot rolled bar arrives in a rougher, scale-bearing condition.
- H9 tolerance is the dimensional tolerance class applied to the drawn bar. Tighter classes can be discussed, but must be agreed at quotation.
- 1.0715 is the material number for 11SMn30 - the two designations describe the same steel, so they are interchangeable on a drawing.
- Coercive strength and yield resistance are optional magnetic and mechanical properties. They are only supplied when specified and verified, and they affect price, testing time and lead time.
Information Required for a Quotation
To receive an accurate offer, please provide:
- Grade and whether 11SMn30 / 1.0715 or an alternative free-cutting grade is acceptable
- Hexagon across-flats size and tolerance class (H9 or tighter)
- Cut length and whether ends need to be deburred or chamfered
- Quantity per size, and whether bundles of 500-1000 kg are suitable
- Any optional requirement to be verified: hardness, straightness, roundness, coercive strength, yield resistance
- Surface condition required in service
- Material certificate and any testing or inspection requirement
- Delivery terms and destination
Manufacturing, Inspection and Delivery
Bar is produced to the 11SMn30 / 1.0715 material datas and inspected against the options agreed on the order. Plate cutting follows a defined route, and the processing procedure and quality testing pages describe how production and inspection are organised.
Packaging and logistics cover bundling, protection and shipment arrangements. Lead time, minimum order quantity and available trade terms depend on size, quantity and current production loading, and are confirmed with each quotation.
Frequently Asked Questions
What is the difference between 11SMn30 and 1.0715?
They are the same free-cutting steel grade: 11SMn30 is the designation and 1.0715 is the corresponding material number.
What size range is available?
Cold drawn hexagon bar from D2.5 mm to D50 mm, in 2-4 m lengths, with an H9 tolerance.
What does cold drawn mean for the surface?
The bar is drawn rather than hot rolled, so it arrives bright and scale-free with tight dimensional control, ready for machining without pickling.
Can straightness, hardness or coercive strength be specified?
Yes. Magnetism, hardness, straightness, roundness, coercive strength and yield resistance are all available as optional requirements.
Can you also cut and machine steel plate?
Yes. Plate is laser cut up to 30 mm and OXY / flame cut above 30 mm, with milling, grinding, drilling, angle preparation and welding to drawing available.
Related Products
Compare this bar with the 1144 / Sum43 cold drawn steel hexagon bar in the same family, review the C360 brass hexagon bar for a non-ferrous alternative, or see the stainless steel hexagon head self-tapping screws where this bar profile is used as a finished part.
Request a quotation?
Send the grade, across-flats size, cut length, quantity and destination, together with any drawing or specification, and we will confirm feasibility, price and lead time.
- Model NO.:
- D2.5-52mm, length 2-4M
- Special Use:
- Free Cutting Steel
- Transport Package:
- 500-1000kg/Bundle
- Specification:
- D2.5-52mm, length 2-4M
- Trademark:
- GOSUN Industrial Co., Ltd.
- Origin:
- China
- HS Code:
- 7215100000
- Production Capacity:
- 60000 Tons/Year
Your cart is currently empty.

